Zoom X5 User Manual page 45

Then you must perform these steps.
1 1 1 1
Load the PS2 Network Adapter Start-up Disc that was
supplied with the PS2 network adapter.
2 2 2 2
Select Get Connected.
3 3 3 3
Select Advanced Options.
4 4 4 4
Select Edit Network Configuration.
5 5 5 5
Select the memory card where you have saved your network
configuration and select your network configuration profile.
6 6 6 6
Select DHCP, set it to No, and fill out these fields:
IP address=10.0.0.50
Subnet mask=255.255.255.0
Gateway=10.0.0.2.
7 7 7 7
Set DNS to No and fill out these fields:
Primary DNS=10.0.0.2
Secondary DNS=10.0.0.2.
8 8 8 8
Save under a different profile name.
9 9 9 9
Select Save all changes and run the diagnostic test.
When running a network game, please select the new profile.
Note: Some online games require that you open up other,
specific ports in your computer's firewall. Your game manual
should list which ports must be opened. If you need additional
guidance opening up ports, please refer to the Virtual Server (Port
Forwarding) section of this manual on page 22.
Appendix B: Online Gaming with Your X5 45