Terminal Layout Of The Main Circuit Terminals, Wiring Of Power Supply And The Inverter - Mitsubishi Electric FR-CC2-N Series Instruction Manual

2.5.2 Terminal layout of the main circuit terminals,
wiring of power supply and the inverter
 Terminal layout
FR-CC2-N450K to N630K
N/-
R/L1 S/L2
Power supply
NOTE
• Make sure the power cables are connected to the R/L1, S/L2, and T/L3 of the converter unit. (Phase need not be matched.)
 Recommended bus bar dimensions (for terminals P/+ and N/-)
Refer to the following for bus bars for terminals P/+ and N/-.
φ15
5ª45°
30
34
2. INSTALLATION AND WIRING
2.5 Main circuit terminals (for 6-phase rectification)
To inverter
P/+
R1/L11 S1/L21
Charge lamp
Jumper
T/L3
2ªR7.5
∗1
24
12
(30)
(Unit: mm)