Table of Contents
Advertisement
3. Technical data
Display
Measuring range
Resolution
Measurement
uncertainty
off-set accuracy
PC connection
Power supply
Ambient
temperature
Air humidity
Dimensions
Weight
Scope of delivery
Attention: All accuracy specifications apply after adjustment!
4
TE 1250-0.1F
TE 1250-0.1FN
4 digits, 10mm LCD display with backlight
0 to 1250 μm / 0 to 50 mil (standard)
0,1 µm (0 to 99,9 µm), 1 µm (over 100)
3 % of the measured value or Min ± 2,5 µm.
Applies within the tolerance band of ± 100 µm
around the typical measuring range if a two-point
calibration was also performed within this
tolerance band
1 % of the measured value or min. 1,0 μm
Applies within ± 50 μm around the offset Accur
RS-232 interface
2x1.5 AAA batteries
126 x 65 x 35mm
Ca 81g (without batteries)
- Carrying case
- Operating instructions
- TF 1250-0.1FN: Built-in measuring probe F and
built-in measuring probe N (carrier material is
automatically detected)
- TG 1250-0.1FN: Measuring probe FN external
(carrier material is automatically detected)
- 1 set of adjustment foils, available for each
model
- Zero plate (aluminium)
- Zero plate (iron)
Optional accessories:
- Software and cable RS-232C: ATC-01
- RS 232 to USB Adapter: AFH 12
- Calibration foils (replacement order): ATB-US07
- External measuring probe FN (For TG 1250-
0.1FN): ATG 01
TE 1250-0.1N
Point
0°C to 50°C
≤
80%
TG_TF-BA-e-2020
Advertisement
Table of Contents
