1.5 Now glue your test specimen on the TPE-N and clamp one end of the test
specimen in the clamp of the force gauge. IMPORTANT: Glue the test
specimen in the centre of the TPE-N.
1.6 As a last step, wire the test stand and the force gauge according to the operating
instructions provided in order to start the test of the test specimen (possible with
or without software, not included in the scope of delivery).
2 Technical data
Capacity
Maximum tractive force
Maximum length of the test specimen
Working temperature
Storage and delivery temperature
Relative air humidity
TPE-N-BA-e-2010
500N
500N
Up to 200mm
20±10°C
-27°C up to 70°C
15% up to 80%
TPE-N-BA-e-20105