Table of Contents
Advertisement
Security System
User Guide
Basic Pager Reports
A pager's display can show up to four fields of information in the following order:
(Account Number) - (Event Number) - (Area Number) - (Point/User Number)
• Account Number: 4-digit account number. If the account number is greater than four digits, the first four digits
are sent.
• Event Number: Panel event numbers. See Panel Event Descriptions on page 43 for information on panel events.
• Area Number: Area number the faulted point is assigned to.
• Point/User Number: Point number assigned to the faulted point. This field can also show a User ID number.
Depending on its configuration, your pager can display any combination of the four fields shown in the order above with or
without field separators. For example:
• Account Number: 1234
• Event Number: 08
• Area Number: 02
• Point Faulted: 21
A pager display configured to show all four fields with separators using the sample information from above would look like:
1234-08-02-21
A pager display configured to show all four fields without separators using the sample information from above would look
like:
1234080221.
Contact your security company to modify pager display configuration.
• User IDs 1 to 32 are reserved for system user.
• User ID 252 is reserved for sked operation.
• User ID 253 is reserved for remote telephone communication.
• User ID 254 is reserved for remote programming communication.
• User ID 255 is reserved for keyswitch operation.
46841D
D623/D625 User Guide
Page 42
© 2003 Bosch Security Systems
Advertisement
Table of Contents
