Renew One-Time Passcodes (Cmd 53) - Bosch D623 User Manual

Renew One-time Passcodes (Cmd 53)

I can perform this command.
I cannot perform this command.
One-time passcodes can only be used once to turn the system off. This command allows those with the applicable authority
level to renew previous One-Time passcodes. Once renewed, the One-Time passcode is again able to turn the system off only
once.
1. Make sure that the system is turned off (On indicator is off).
2. Press [CMD] [5] [3]. The command center may prompt you to enter your passcode.
3. Enter your passcode if necessary. The command center scrolls through the available one-time passcodes.
4. Press [0] [*] if you want to renew all one-time passcodes or press the passcode number followed by [*]. For
example, if you want to renew Passcode 5, press [5] [*].
5. If you press [0] to renew all one-time passcodes, the command center displays:
6. If you select a single passcode to renew, like Passcode 5, the command center displays:
7. The system returns to the normal display.
© 2003 Bosch Security Systems
To renew all
One-time codes
Press 0*.
To renew code 5
Press 5*.
All one-time
codes renewed.
One-Time Code 5
renewed.
D623/D625 User Guide
Page 25
Security System
User Guide
46841D