Table of Contents
Advertisement
Security System
User Guide
Check System Troubles (Cmd 4)
Your system emits a trouble tone and displays the System Trouble message to alert you to a system trouble event, like low
batteries. Use this command to learn what is causing the trouble and the steps to take to correct it.
1.
The system may be on or off when a system trouble occurs. If the system is on, you must turn it off to check
the trouble. The command center displays:
2.
Press [CMD] [4]. The trouble tone silences and the command center scrolls through the list of troubles.
Follow the command center display instructions to view the trouble events.
3.
Press [CMD] to return the command center to the normal display.
The trouble tone continues until the situation is acknowledged.
The trouble tone for AC Failure events sounds at all command centers in all areas. However, the trouble tone must be
silenced in each area (silencing it in one area does not silence it in the other areas).
IMPORTANT
46841D
Trouble! Press
Cmd 4 to view.
Point Trouble!
Press 8 to view.
Alarm Memory!
Press 0 to view.
Date/time lost!
Press 5 to set.
System Trouble!
Press 2 to view.
To Test System,
press 1.
To Walk Test,
press 4.
To reset,
Press 7.
System OK!
Press Cmd.
D623/D625 User Guide
Page 26
© 2003 Bosch Security Systems
Advertisement
Table of Contents
