Selecting Watch Tone - Bosch Security Systems User Manual

Hide thumbs Also See for Security Systems:
Table of Contents

Advertisement

Selecting Watch Tone

Your system gives you the ability to watch points when it is turned off, so it
can be programmed to alert you to opened doors and windows. For
example, parents with small children may want a tone to be sounded
whenever a door or window is opened as a way of monitoring the
whereabouts of the kids.
Use this feature to set the type of response your system produces when a
watch point is faulted. For example, you may tell your system to blink a
light and sound a short tone whenever certain doors or windows are
opened. Use Selecting Watch Points (on page 22) feature to specify which
points in your system are to be watched.
If you just want to review (not change) the current watch tone setting,
press the [7] key.
1.
Make sure the system is off (On light is off).
2.
Press the [7] key. The display shows the current watch tone selected.
In this example, the current watch tone setting is Short Beep:
3.
Enter your passcode (Owner Type required). The display again
shows the current watch tone selected, followed by the the four
watch tone options. Select the type of watch tone you want by
pressing the indicated digit:
1- Off. Displays point identity, but sounds no tone when points
are faulted.
2- Short Beep. Displays point identity and sounds a short tone
when points are faulted.
3- Beep Till Key. Displays point identity and sounds a tone until
the [CLEAR] key is pressed.
4- Beep Till Closed. Displays point identity and sounds a tone
until the point is returned to normal (door or window is
closed). Pressing the [CLEAR] key also silences the tone.
4.
After making your selection (for example, option 3), the display
confirms the choice you made before returning to the off state:
WATCH TONE IS
SHORT BEEP
ENTER OWNER CODE
TO CHANGE TONE
WATCH TONE IS
BEEP TILL KEY
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents