Selecting Watch Tone - Bosch 2212 User Manual

Selecting Watch Tone

Your system gives you the ability to watch points when it's turned off,
meaning that it can be programmed to alert you to opened doors and
windows. For example, parents with small children may want a tone to
be sounded whenever a door or window is opened as a way of
monitoring their whereabouts.
Use this feature to set the type of response your system produces when
a watch point is faulted. If you wish, you may tell your system to display
the identity of the point and sound a short tone whenever certain doors
or windows are opened. Use the Selecting Watch Points feature to
specify which points in your system are to be watched.
If you just want to review (not change) the current watch tone setting,
press [7].
1. Make sure that the system is off (On light is off).
2. Press [7]. The display shows the current watch tone selected. In
this example, the current watch tone setting is Short Beep:
WATCH TONE IS
SHORT BEEP
ENTER OWNER CODE
TO CHANGE TONE
3. Enter your passcode (Owner type required). The display again
shows the current watch tone selected, followed by the four
watch tone options. Select the type of watch tone you want by
pressing the indicated digit:
1 Off. Display point identity, but sound no tone when points
are faulted.
2 Short Beep. Display point identity and sound a short tone
when points are faulted.
3 Beep Till Key. Display point identity and sound a tone until
[CLEAR] is pressed.
4 Beep Till Closed. Display point identity and sound a tone
until the point is returned to normal (door or window is
closed). Pressing [CLEAR] also silences the tone.
4. After making your selection (for example, Option 3), the display
confirms the selection before returning to the off state:
WATCH TONE IS
BEEP TILL KEY
20