Selecting Watch Tone - Bosch D220 User Manual

Selecting Watch Tone

Your system gives you the ability to watch points when it's turned off,
meaning that it can be programmed to alert you to opened doors and
windows. For example, parents with small children may want a tone to
be sounded whenever a door or window is opened as a way of
monitoring the whereabouts of the kids.
Use this feature to set the type of response your system produces when a
watch point is faulted. For example, you can tell your system to blink a
light and sound a short tone whenever certain doors or windows are
opened. Use the Selecting Watch Points (on page 20) feature to specify
which points in your system are to be watched. To select a watch tone:
1. Make sure the system is off (On light is off).
2. Press the [7] key and enter your passcode. The display shows the
current watch tone selected. In this example, the current watch
tone setting is 1:
3. Select the type of watch tone you want by pressing the indicated
digit:
1 Blink point light, but sound no tone when points are
faulted.
2 Blink point light and sound a short tone when points are
faulted.
3 Blink point light and sound a tone until the [CLEAR] key
is pressed.
4 Blink point light and sound a tone until the point is
returned to normal (door or window is closed). Pressing
the [CLEAR] key also silences the tone.
4. When you have made your selection, press the [CLEAR] key to
return to the off display.
19