Renew One-Time Passcodes - Bosch Security Systems User Manual

8. After changing a passcode you should check to see which type it is.
9. You may continue to change passcodes by following the displayed
instructions, or press [CLEAR] to exit.

Renew One-Time Passcodes

I have this feature.
I do not have this feature.
One-Time passcode may be used only once to turn the system off. This
feature allows those with Owner type passcodes to renew One-Time
passcodes that have been used. Once renewed, the One-Time passcode
again turns the system off one time.
1. Make sure the system is turned off (On light is off).
2. Press the [6] key and enter your passcode (Owner type required).
The display scrolls the following:
3. Press [9]. The display shows:
4. The system returns to the off state.
PUSH 9 TO RENEW
ALL ONE-TIME
PUSH 1 TO CHANGE
CODE TYPES
PUSH 0 TO CHANGE
CODES
PUSH CLEAR
TO EXIT
ONE-TIME CODES
RENEWED
31