Important Things To Ote While Creating Stinger Transition Effects - Datavideo HS-3200 Instruction Manual

7. Once completed, the status will display "Done."
After the sequential files are created and ready, see the following sub-sections on how you
can import the Clip file to the switcher.

Important things to ote while creating Stinger Transition Effects

When using Datavideo's HS-3200 Multi-Channel Switcher to design and create the Stinger
Transition Effects, in addition to being creative, there are a few things that you need to take
into account of.
1. Length limit of the stinger transition animation
The length of a good stinger transition animation should be approximately 0.5 to 2 seconds.
2. The HS-3200 allows a maximum of 200 image files in an animation sequence
The number of image files will determine the length of stinger transition time.
3. While designing the animation, it is best to have an image that fills up the entire frame
to create a satisfactory visual effect (please see the images below).
89