Enabling Logo Animation; Loading An Existing Ani-Logo From Memory - Datavideo HS-3200 Instruction Manual

5. Check on the program's Logo page to make sure that the logo has been imported
successfully.
6. After successfully importing the logo into the switcher, you will then be able to start
loading the new logo to the buffer. To enable the logo on Preview and Program Out, press
the Logo button.

5.6 Enabling Logo Animation

The HS-3200's logo animation function places an animated logo layer on your video. Each
animated logo consists of a series of 120 sequential files in bmp, jpg, png or pic format.
Every image file is limited to an aspect ratio of 480x270.
In this section, we will show you how to import animated logo to the switcher, load
animated logo on the switcher as well as enabling the loaded animated logo on Preview and
Program Out.
Note: The HS-3200 has enough storage space for up to 1000 uncompressed animated logo.

Loading an existing Ani-Logo from Memory

The HS-3200 allows the user to load ani logo from the machine's memory to the logo buffer
(Logo 1 or 2), then press either Logo 1 or Logo 2 button to enable the loaded ani logo on
both the Preview and Program Out. Follow the steps outlined below to load the desired ani
logo from memory.
Files File Type
Load Ani Logo
Ani Logo
Load Ani Logo
Thumbnail Thumbnail
Picture – 1
93
13 Logo 1
Thumbnail
Picture Picture + 1