Proc Amp; Audio; Crosspoint; Audio Xpt - Datavideo HS-3200 Instruction Manual

9. Locate DSK buttons on the switcher's control panel then depending on the settings
selected at Step 8, press DSK 1 or 2 button to open your CG graphics on either of the
preview and program windows or both.

Proc Amp

Proc Amp allows the user to configure the input color by adjusting its Black Level (0 – 100%),
White Clip (0 – 100%) and Chroma Gain (0 – 16) parameters.

Audio

Gain (0 – 24 dB): adjustment of the input audio volume for a particular selected video input.
Delay (0 – 375 ms): sets the delay of the audio component of a particular selected video
input.

Crosspoint

The crosspoint function allows the user to shuffle the contents of Inputs 1-12 without
changing the physical connections at the back of the machine. For example, the user is
allowed to assign the input 2 video source to input 1, after which the input 2 video will be
displayed on the input 1 window. Select OFF if you would like to disable the input port.
 Input 1-12
 OFF

Audio XPT

The Audio XPT feature allows the user to associate the audio component of any input source
to any of the input buttons (1 – 12), thus cross assigning audio input channels to
program/preset row buttons. Available options are listed as follows:
 Input 1-12
 External
 Follow
"External" selects audio source from AUDIO IN ports.
Select "Follow" to set the audio to Audio-Follow-Video mode in which the PGM audio is
played via AUDIO OUT port. Please note that there will be no audio delay.

4.7 Outputs

This option allows the user to configure various output settings such as video output, Tally
mode and GPI connection.
Advanced mode
Outputs Output
Mask Left
Top
Sdi 1 Input 1 Sdi 2
Sdi 4 Input 4 Sdi 5
HDMI Pgm
0% Right 0%
0% Bot 0%
Input 2 Sdi 3
Input 5
57
Input 3