Loading An Existing Still From Memory; Deleting A Saved Still From Memory; Fs - Frame Store Button - Datavideo HS-3200 Instruction Manual

4. To save a Still from the currently selected Stills buffer, the user should select a Still
number that has not been used yet, and select 'Save'.
5. The save process takes about 15 seconds, after which the new thumbnail picture will be
shown within the Still display under the chosen still number.

Loading an existing Still from Memory

The Still Load Menu allows stills already stored in the HS-3200 to be loaded to a Still buffer
(Still 1 or 2) or an Input buffer (Inputs 1 – 12). Follow the steps below to load the still.
Files File Type
Load Still
Save Still
Grab Still
The Still menu screen (shown above) shows thumbnail pictures of up to 3 saved stills at a
time. If there are more than 3 stills stored in the HS-3200 then the Menu Control's up/down
arrow buttons can be used to move through the saved stills. The stills are shown in
numerical order, and any numbers not used will be blank.
To load a still, simply browse to a Still number and select a still buffer then select 'Load'. The
selected still will be loaded into the selected buffer. In the above example, the still buffer
will be loaded with the image in memory slot 10.

Deleting a saved Still from Memory

To delete a saved still, select a still number that is no longer required. Select 'Delete' and
you will be prompted to confirm the delete. Select 'YES' to remove the still from the
switcher's memory and 'No' to cancel the delete.
Note: The deleted still, if pre-loaded to the current Still or Input buffer, will be kept until
another still image is selected or grabbed to occupy this buffer.
FS – Frame Store Button
The HS-3200 has twelve video channels and each of these channels has its own
Frame Store, making a total of twelve Frame Stores. Each of these Frame
Stores can hold one still image. The FS button allows the user to call the still
image into the production and toggle between that still image of the Frame
Store and the live video input connected to that same video channel.
How to choose live video input or Frame Store
1. First press and hold down the FS button. The Preset row of input sources will flash
green.
Still
Load Still Num
Thumbnail Thumbnail
Picture – 1
Save
Grab
77
10 Still 1
Thumbnail
Picture Picture + 1
Still 1 Still Num
Delete
Still 1
10