Rev Button; Managing Still Pictures; Grabbing & Saving A Still To Memory - Datavideo HS-3200 Instruction Manual

Width Value
This value determines how wide the actual wipe effect is. A low value makes a narrow wipe.
A large value makes a wider wipe.
Hue, Sat and Luma values
The colour of the Wipe Border Matte can also be controlled by adjusting the Hue, Sat and
Luma values.
Wipe Position
Certain Wipes, such as the Circle and the Oval Wipes, allow the Wipe position to be
controlled.
The X value allows the selected wipe to be offset to the left or right of the screen.
The Y value allows the selected wipe to be offset to the top or bottom of the screen.

REV Button

When the REV Button is OFF the selected WIPE or DVE transition will operate
in its default direction only. When the REV Button is ON then the selected
transition will operate in the reverse direction.

5.3 Managing Still Pictures

On the HS-3200 Switcher, the user will be allowed to manipulate uncompressed still pictures
with Grab and Frame Store functions. In this section, you will also be guided to load the stills
saved on the switcher and display them on the monitor.
The Main Unit has one frame store to which a still can be loaded, and the unit has enough
storage space for up to 1000 uncompressed stills.
Grabbing & Saving a Still to Memory
The Grab & Save options of the OSD menu allow new Still Images to be created by grabbing
& saving the current Program video frame image to two internal still buffers in the HS-3200.
1. Press the MENU button to open the OSD menu (shown below) on the Multiview display.
Stills File Type
Load Still
Save Still
Grab Still
2. The Program output is grabbed to a Still buffer (Still 1 or 2) by selecting 'Grab'.
3. The user can look at the Multi Image Preview and decide if this Still should be saved.
Still
Load Still Num
Thumbnail Thumbnail
Picture – 1
Save
Grab
76
1 Still 1
Thumbnail
Picture Picture + 1
Still 1 Still Num
Delete
Still 1
1