Placing Text On The Video Using Luma Key - Datavideo HS-3200 Instruction Manual

9. Locate DSK buttons on the switcher's control panel then depending on the settings
selected at Step 8, press DSK 1 or 2 button to open your CG graphics on either of the
preview and program windows or both.
DSK Preview and DSK Program

6.2 Placing text on the video using luma key

Note: If the text image is dark, choose a white background; if the text image consists
primarily of bright colors, choose a black background.
1. Connect the laptop to the switcher's HDMI Input Port 9.
2. Press the MENU button to open the OSD Menu on the Multiview display.
3. Select Keyer to open the Keyer sub menu.
Keyer
Keyer Ctrl
Key Source
Mask Left
Top
On the HS-3200 Control Panel / Keyboard there are four DSK
keys. These are labelled Program and Preview. The upper
DSK1 and DSK2 keys relate to activating Down Stream Keying
on the Program outputs. The lower DSK1 and DSK2 keys
relate to activating Down Stream Keying on the Multi-view or
Preview outputs.
To display the CG subtitle configured previously, simply press
the DSK 1 PGM or DSK 1 PVW button to enable the
downstream key on the PGM or PVW screen.
Keyer Key 1
Luma
Lift
Input 9
Mask Left
Top
0% Right
0% Bot
The HS-3200 allows the user to place a logo or
text image (ideally black and white) on the
video using the luma key function. First of all,
create a 1920x1080 (16:9) text image against a
black or white background on a laptop. Once
the text image is created, please follow the
steps outlined as follows to insert the text
image.
Self
0% Gain
Fill Black
0% Right
0% Bot
101
0%
0%
Opac 100%
1.0 Invert
0%
0%
Off