Chapter 7 Video Streaming And Recording; Streaming Network Connection And Device Search; Connecting To A Dhcp Network (Dhcp Mode) - Datavideo HS-3200 Instruction Manual

Chapter 7
The HS-3200 Portable Video Studio includes a built-in Video Streaming Server (NVS-31)
allowing the user to stream and record your program at the same time. From any SDI/HDMI
input sources, the Datavideo's video streaming server generates an H.264 encoded stream
that is compliant with RTSP or RTMP(S) protocols. While encoding the video at bit rates
appropriate for live streaming, the Datavideo NVS-31 concurrently records a high-quality
MP4 file to an SD card.
Note: The built-in video streaming server and recording device are referred to as NVS-31.

7.1 Streaming Network Connection and Device Search

This section details how to connect the NVS-31 to a network with or without a DHCP server,
and describes how to acquire the NVS-31's IP address.

Connecting to a DHCP Network (DHCP Mode)

Follow the following procedure to scan your DHCP network for connected NVS-31 devices.
Note: The NVS-31 will be automatically assigned an IP address upon connection to the
DHCP network.
1. Connect the NVS-31's stream port to the network via an Ethernet cable.
2. Turn on the HS-3200's power and the NVS-31 will also be turned ON in
the DHCP mode by default.
3. Connect the laptop to the same network that the NVS-31 is connected to and download
the free IP Finder utility program.
4. Double click the IP Finder utility program icon to open the IP Finder
interface.
5. Click the SCAN button to start searching for connected devices.
Video Streaming and Recording
114