If P-in-P is selected, adjust its parameters in the P-in-P sub menu.
For example, if the user selects Key 1 Chroma P-in-P, you will then be able to apply
the chroma key effect to the P-in-P window by configuring the respective chroma keyer
parameters in the Chroma sub menu.
In the example below, after Keyer 1 is configured, by pressing the Key 1 button on the
switcher's control panel, the user will thus be able to enable the P-in-P window on the
respective display monitor with the chroma key effect applied.
Keyer
Keyer Ctrl
Key Source
Key Source
This option allows the user to assign the key source; various options are listed below:
Bars: Color bars
Matte: A configurable color screen and the Matte value can be set in Matte option
of the Start menu
Flex Src: Selected Flex source
Still 1/2: Still picture loaded to Still 1/2 buttons
Input 12: Image source loaded to input button 12
Input 11: Image source loaded to input button 11
Input 10: Image source loaded to input button 10
Input 9: Image source loaded to input button 9
Input 8: Image source loaded to input button 8
Input 7: Image source loaded to input button 7
Input 6: Image source loaded to input button 6
Input 5: Image source loaded to input button 5
Input 4: Image source loaded to input button 4
Input 3: Image source loaded to input button 3
Input 2: Image source loaded to input button 2
Input 1: Image source loaded to input button 1
Black: Black Screen
Fill Source
This sub-option allows the user to assign the fill source; various options are listed below:
Bars: Color bars
Matte: A configurable color screen and the Matte value can be set in Matte option
of the Start menu
Keyer
Key 1
Chroma
Lift
Input 1
Mask
Left
Top
(Flex Src
Self
0% Gain
1.0 Invert
Fill
Black
0% Right
0%
0% Bot
0%
option menu)
44
Opac
100%
Off