5. After the Flex™ output and the four PIP windows are successfully configured, enable the
Flex™ output by pressing the Flex™ button while holding down the SHIFT button, and then
press KEY1 PGM to KEY4 PGM buttons to activate the four PIP windows on the Program
Output. The diagrams below provide an example of an eight PIP window display.
6.5 Shortcut Keys to assigning Output Sources
In general, the HS-3200 offers 9 output ports (SDI 1 – 6 / HDMI 1-3) and all 9 ports can be
configured to output one of the following:
Flex Src
Still 2
Still 1
Input 1 – 12
CLN PVW (Clean PVW)
CLN PGM (Clean PGM)
PG + DSK
PVW
PGM
MultiV2 (Multi view 2)
MultiV (Multi view)
In addition to setting the source of these 9 output ports in OSD menu Outputs Output,
you can also use the shortcut keys on the control panel to assign the output sources. The
instructions are outlined as follows:
The diagram below depicts the corresponding buttons for selecting the respective
1.
output ports as well as the video sources. The program row on the top allows you to first
select the output port and the preset row below allows you to then assign a video
source to the selected output port.
111