Displaying A Variety Of Sources At The Same Time; Basic Flex™ Output (Four Pip Windows) - Datavideo HS-3200 Instruction Manual

6.4 Displaying a variety of Sources at the same time

The Flex™ output allows the user to show a variety of sources at the same time and these
sources can then be fed as one combined image to the HS-3200 Program or Preview outputs.
The Flex™ output could be as simple as one background image and four smaller source
images to make a basic Flex™ layout.
Alternatively it could be a lot more complex with a fifth image source making a fifth PIP
window. You also have the ability to place a user defined color border around all PIP
windows. You can re-size, crop, rotate and position the PIP windows in almost any manner
that you wish. With the HS-3200, you will be allowed to enable up to eight PIP windows on
the Flex™ output.
To configure the Flex™ settings, simply follow the steps outline below.
Basic Flex™ Output (Four PIP Windows)
1. Enable Flex™ output on PGM or PVW window (press SHIFT and while holding down the
SHIFT button, press the FLEX button). This will display the Flex™ output layout on either the
PVW or PGM screen so that you will be able to configure the Flex™ output windows while
viewing the changes.
2. Press the MENU button on the switcher's control panel to open the OSD menu on the
Multiview screen and select Flex Src sub menu. On the sub menu that opens, select any of
the presets to enable the desired preconfigured layout on the screen.
106