Importing Animated Logo From Pc - Datavideo HS-3200 Instruction Manual

On the ani logo menu, you should find a thumbnail view of three animated logos. Use the
up/down arrow buttons to browse all other animated logos which are shown in numerical
order. Black thumbnails are unused memory slots.
To load an animated logo, simply browse to an ani logo number and select a logo buffer
then select 'Load'. The selected animated logo will be loaded into the selected buffer. In the
above example, logo 1 will be loaded with the animated logo saved in memory slot 13.
To adjust the animated logo position, simply change the X and Y values of the respective
logo buffer which can be found at the bottom of the Ani Logo menu.
Selecting "Clear Logo" clears the logo buffer. Selection of "Delete Logo" removes the
animated logo from the selected memory slot.

Importing Animated Logo from PC

The Switcher Image Import/Export software (SwitcherImageImEx_vx.x.x.msi) allows the
user to import animated logos from the PC to a designated memory slot of the switcher. The
software installation package can be downloaded from the product page.
Note: Each animated logo consists of a series of 120 sequential files in bmp, jpg, png or pic
format. Every image file is limited to an aspect ratio of 480x270.
See Chapter 3 for installation instructions and network configuration.
How to use
1. Open the Switcher Image Import/Export Program and make sure the Connect Status
shows "Connected" (shows Not Connected if disconnected).
Clear Ani Logo
Logo 1 X
Logo 2 Y
-37% X
0% Y
94
Delete Ani Logo
24%
0%