Flex Output; Still Button; Transitions - Datavideo HS-3200 Instruction Manual

The Sat or Saturation value refers to the intensity of the color selected in Hue. As the
saturation increases, the color appears to be more pure. As the saturation decreases, the
color appears to be more washed-out or pale.
The Luma value relates to how bright or dark the selected color or hue is. The higher the
Luma value, the brighter the color selected in Hue.

Flex Output

The Flex™ output allows the user to show a variety of sources at the same time
these can then be fed as one combined image to the HS-3200 Program or
Preview output.
The Flex™ output is basically a combination of one background image and four other Picture
in Picture windows. Press and hold the SHIFT button and then press the FLEX button to
activate the Flex™ output. To deactivate, press the FLEX button again.
You will have the ability to place a user defined color border around the smaller PIP
windows. You can re-size, crop, rotate and position the PIP windows in almost any manner
that you wish. See Section 4.5 Flex Src

Still button

5.2 Transitions

The Transitions group of buttons allows the user to decide how to bring
the selected Preset / Next source image to the Program output. The HS-
3200 user can decide to use a CUT, MIX, WIPE or DVE (Digital Video
Effect) transition. In order to use these transition options the TRANS BG
(Transition Background) Button needs to be enabled (backlit Red) in the
TRANS EFFECT area of the HS-3200 Control Panel.
AUTO Button
The AUTO button is used instead of the manually operated T-Bar and
automatically performs the complete selected transition between Program and
Preset over a set period. The M/E value in the START menu is used here. See
Section 4.1
CUT Button
The CUT button is used to immediately switch between the currently selected
Program and Preset sources.
for details on the Flex Output Configurations.
Press and hold the SHIFT button and then press the STILL button to
switch the Main Program view to a still picture. Before pressing the
Still button, make sure the still pictures are loaded to the still
buffers (Still 1/2), which can be done in the OSD menu.
on page 37 also.
73