Crop - Datavideo HS-3200 Instruction Manual

Luma, Sat and Hue
The color of the Shade Matte can also be controlled by adjusting the Hue, Sat and Luma
values.
For Hue value, Red is 0, Green is approximately 120 and Blue is approximately 240. For
secondary colors, Yellow is approximately 60, Cyan is approximately 180 and Violet is
approximately 300.
The Sat or Saturation value refers to the intensity of the color selected in Hue. As the
saturation increases, the color appears to be more pure. As the saturation decreases, the
color appears to be more washed-out or pale.
The Luma value relates to how bright or dark the selected color or hue is. The higher the
Luma value, the brighter the color selected in Hue.
Shade Softness, Shade Position and Direction
The Shade Matte can be further configured by adjusting its softness (Shade Soft) and width
(Shade Pos).
Shade Soft
This blurs or softens the Shade Matte area.
Shade Position
The position of the boundary line between Shade Matte and Border Matte is controlled by
the Shade Pos value.
Increasing this value moves the boundary line such that the Shade Matte occupies less of
the width of the border. Decreasing this value moves the boundary line such that the Shade
Matte occupies more of the overall border width. When this value is 0, the Shade Matte
occupies all of the border width.
Note: You will see dual colors only if options "Shaded" and "Bevel Shaded" are selected.
Direction
Direction sets the direction of the light source with the value of parameter ranging from 0 to
355. The default is 35, which indicates a direction of North East. You will see the border's
color shadow changes as the Direction value is changed. The directions that specific
parameter values correspond to are listed as follows:
 0: North
 90: East
 180: South
 270: West

Crop

The PIP image crop can be adjusted by modifying the following parameters:
 Left – Adjusts the position of the left edge of the PIP image.
 Right – Adjusts the position of the right edge of the PIP image.
51