Connecting To A Network; Multi View - Datavideo HS-3200 Instruction Manual

Connecting to a Network

Use the Ethernet Port to connect the switcher to the PC with the Image Import/Export
Software installed.
For details on the Switcher Image Import/Export Software, see Chapter 3.

2.2 Multi View

The HS-3200 Multi view output can be supplied from the HDMI or SDI outputs, see Chapter
4 (4.7) for configuring the outputs. The Multi view shows monitoring images for Preview
(PVW), Program (PGM) and Inputs 1~12. The Multi view can also show audio level bars
overlaid on the Program image. This confirms the analogue XLR audio input is being received
and embedded to the selected Program output(s).
HS-3200 Multi-view is supplied from the HDMI connection(s) on the rear panel and available
across multiple HDMI monitors (not supplied). Since a variety of multi-image layouts is
available, these HDMI outputs can be used to monitor video and audio in a number of
different configurations. The layout of the multi view can also be changed. The sources can
be swapped around using the cross point section of the Inputs menu. For each setup,
embedded audio level indication is available on the Preview and Program windows.
The diagrams below depict four different multi-view layouts available on the HS-3200.
19