Import Still Images From Pc - Datavideo HS-3200 Instruction Manual

2. While still holding down the FS button, press the required input on the Preset row.
For example, pressing button 1 switches the video channel to the still picture mode.
3. To return to the live video mode, simply press the channel button again.
This selection will also be confirmed on the Multi-view output, with the selected channel
showing the live input or frame store image.
Note: Before using the FS function, first make sure the still picture has been loaded to the
input video channel. Refer to

Import Still Images from PC

The Switcher Image Import/Export software (SwitcherImageImEx_vx.x.x.msi) allows the
user to import still pictures from the PC to a designated Still number in the switcher. The
software installation package can be downloaded from the product page. Features of the
Import/Export software are listed as follows:
- Supported file formats are BMP, JPG, PNG, and PIC.
- Minimum resolution is 1280 x 720.
See Chapter 3 for installation instructions and network configuration.
How to use
1. After the utility is successfully installed, double click the icon to run the program. Since
the program is executed for the first time, it will automatically scan the network and if
multiple network interface cards are found, simply select the card that is on the same
network as the device.
2. If the available device is scanned and found, the connection will be automatically
established and the Connect Status will show "Connected" (will show Not Connected if
disconnected).
Section 5.3 for instructions on loading still pictures.
78