User Mems; Load Memory; Save Memory; Factory Default - Datavideo HS-1600T MKII Instruction Manual

3.6 User Mems

In "User Mems", the user is allowed to load previously saved settings and save the currently
configured settings.
Main Sub-Menu
User Mems

Load Memory

Load

Save Memory

Save

Factory Default

Load Memory
Use the up/down arrow to select the desired memory location and load the saved setting by selecting
"Load".
Tip: The user can also press one of the USER memory shortcut buttons (1-3) on the control panel as a
quick way of loading those previously saved User configurations. Use the SHIFT button to switch
between USER MEMORY 1-3 and USER MEMORY 4-6.
Save Memory
Use the up/down arrow to select the desired memory location and save the current setting by
selecting "Save".
Factory Default
Reset: Once selected, the factory default settings will be restored. The device will start the factory
reset process in 2 to 3 seconds after "Reset" is selected.

3.7 Setup

In the "Setup" menu, the user can change the output resolution, reset the HS-1600T MKII to its
Factory Default values, choose the preferred OSD menu language, upgrade firmware and view the
current firmware versions (Mainboard and Keyboard).
Main Sub-Menu
PGM Out Res.
Setup
MV Out Res.
Options or Values
User 1-6
User 1-6
[Reset]
Options or Values
1080p/60
1080p/59.94
1080p/50
1080p/30
1080p/25
1080i/60
1080i/59.94
1080i/50
720p/60
720p/59.94
720p/50
576i
480i
1080p/60
1080p/59.94
1080p/50
30
Default Value
Default Value