Changing Viewer Password; Changing Http/Https Web Port; Figure 7: Viewer Level Password - Grandstream Networks HT813 Administration Manual
Fxs/fxo port analog telephone adaptor
Hide thumbs
Also See for HT813:
- Administration manual (64 pages) ,
- Manual (9 pages) ,
- Quick installation manual (3 pages)
Table of Contents
Advertisement
https://arttel.ru/
Changing Viewer Password
1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings New Viewer Password and enter the new viewer password.
5. Confirm the new viewer password.
6. Press Apply at the bottom of the page to save your new settings.
Changing HTTP/HTTPS Web Port
1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings HTTP(S) Web Port.
5. Make sure that the Web Access Mode is set to HTTP(S).
6. Change the current port to your new HTTP(S) port. Ports accepted are in range [1-65535].
7. Press Apply at the bottom of the page to save your new settings
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813
Figure 7: Viewer Level Password
HT813 Administration Guide
Version 1.0.1.2
P a g e
|
22
Advertisement
Table of Contents
