Connecting Ht813; Scenario 1: Connecting The Ht813 Using Wan Port; Scenario 2: Connecting The Ht813 Using Lan Port; Table 3: Ht813 Connectors Definitions - Grandstream Networks HT813 Administration Manual

https://arttel.ru/

Connecting HT813

The HT813 is designed for easy configuration and easy installation. To connect your HT813, please follow
the steps below:

Scenario 1: Connecting the HT813 using WAN Port

When connecting HT813 using the WAN port, it will act as simple DHCP Client.
1. Insert a standard RJ11 telephone cable into the FXS port and connect the other end of the
telephone cable to a standard touch-tone analog telephone.
2. Connect the WAN port of the HT813 to a router, switch or modem using an Ethernet cable.
3. Insert the power adapter into the HT813 and connect it to a wall outlet and make sure to respect
the technical specifications of the power adapter used.
4. Power, WAN and FXS LED will be solidly lit when the HT813 is ready for use.

Scenario 2: Connecting the HT813 using LAN Port

When connecting the HT813 using the LAN port, it will act as a router and DHCP serving addresses, the
devices connected with HT813 LAN will pull DHCP addresses from your HT813.
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813

Table 3: HT813 Connectors Definitions

FXS Connects the analog phone / fax machine to the ATA using an
RJ-11 telephone cable.
FXO FXO telephone port (PSTN Port) 1x PSTN pass-through and life line
port.
Connects the ATA to your router, switch or modem using an
Ethernet RJ45 network cable.
co
Connects the ATA to your PC or switch using an Ethernet RJ45
network cable.
DC 12V Connects the ATA to PSU (Output: 12V/0.5A )
Reset Factory reset button. Press for 7 seconds to reset factory default.
settings. Quick press will only reboot the unit.
HT813 Administration Guide
Version 1.0.1.2
P a g e | 14