Memory- Cancellation Of All Measurements; Pc-Link Functions; Installation And Data Transmission - Microlife BP 3BU1-4 Instruction Manual

5.8. Memory– cancellation of all measurements
Attention!
Before you would like to cancel all measurements, please confirm the user
objective first.
Just depress the MEMORY button more than
7 seconds, it will show CL symbol with 3
short beep sounds to express the
cancellation operation has worked.
Note: If your last stored measurement is
taken from average mode, you will see
icon around the 3rd second with one
short beep.
6.

PC-LINK FUNCTIONS

This unit can be used in connection with a persoanl computer (PC) running the
Microlife Blood Pressure Analyser (BPA) software. The memory data can be
transferred to the PC by connecting the monitor via cable with the PC.

6.1. Installation and Data Transmission

a) Insert CD into CD ROM drive of your
PC. The installation will start
automatically. If not, please click on
«SETUP.EXE»
b) Connect the monitor via cable with
the PC. Three horizontal bars will
appear on the display and last for 3
seconds.
c) The bars will then flash to indicate that
the connection between computer and
device is successfully made. As long as
the cable is plugged, the bars will keep
flashing and buttons are disabled.
1
1
1
17