Hypertension Risk Indicator; Memory - Storage And Recall Of The Measurements; Memory- Cancellation Of All Measurements - Microlife BP3NC1-1W Instruction Booklet

5.7. Hypertension Risk Indicator

The colored bars on the left-hand edge of the LCD show you the range within
which the indicated blood pressure value lies. Depending on the color of the
bar, the readout value is either within the normal (green), borderline (yellow) or
danger (orange, red) range.
The classification is based on standards established by the National Institutes
of Health JNC7, 2003. Refer to the chart in section 2.2 of this instruction man-
ual for details of the classifications.
he traffic light bar illuminates according to your measurement:
• If the green bar lights up, your measurement is "Normal" according to NIH
standards.
• If the yellow bar lights up, it is "Pre-Hypertension" according to NIH stan-
dards.
• If the orange bar lights up, it is in the "Stage 1 Hypertension" zone.
• If the red bar lights up, it is in the "Stage 2 Hypertension" zone.
5.8. Memory – storage and recall of the measurements
This blood pressure monitor automatically stores the last 99 measure-
ments values for each user. By pressing the MEMORY button, average of
existing memory readings displayed first with an " " and (MR) at the
lower left. Press MEMORY button again, the last measurement (MR99) as
well as the previous 98 measurements (MR98, MR97, .....MR1) can be
displayed one after the other.
5.9.Memory– cancellation of all measurements
ttention!
Before proceeding to clear all the memory, make sure that you don't have
to make reference to the readings in the future.
To delete all stored readings, press the MEMORY
button for at least 7 seconds. The display will show
the symbol "CL" and 3 short beeps will sound to
indicate deletion of stored readings.
12
1