Advertisement
Available languages
Available languages
b)
After the suitable inflation pressure has
been reached, the pump stops and the
pressure gradually falls. The cuff pressures
are displayed. In case that the inflation
pressure is not sufficient, the monitor
automatically re-inflates to a higher level.
c)
When the instrument detects a pulse, the
heart symbol in the display starts to flash
and a beep is heard for every heartbeat.
d)
A longer beep is sounded for 3 seconds
when the measurement has been completed.
The systolic, and diastolic blood pressures
and pulse rate now appear in the display.
Example (Fig.): Systole 118, Diastole 73,
Pulse 75
e)
The measurement reading remains on the
display until you switch off the instrument. If
no button is pressed for a period of 5
minutes the instrument switches itself off in
order to preserve the batteries.
f)
When the unit is set to Average Mode setting
generally 3 separate measurements will take
place in succession and calculates your detected
blood pressure value. There will be 15 seconds
resting time in-between each measurement. A
count down indicates the remaining time and a
beep will sound 5 seconds before the 2nd and 3rd
readings will begin. But in case that the single
data of each cycle differ too much from each
1
1
mmHg
mmHg
1
mmHg
mmHg
1
15
Advertisement
Chapters
