Memory - Storage And Recall Of The Measurements; Memory- Cancellation Of All Measurements - Microlife BP 3BU1-5 Instruction Manual

5.6. Memory – storage and recall of the measurements
The blood-pressure monitor automatically
stores each of the last 30 measurement val-
ues. By pressing the MEMORY button, the
last measurement (MR1) as well as the fur-
ther last 29 measurements (MR2, MR3, ...,
MR30) can be displayed one after the other.
(MR1: Values of the
last measurement)
Further information
Measurements should not occur soon after each other, since other-
wise, the results will be falsified. Wait therefore for several minutes
in a relaxed position, sitting or lying, before you repeat a measure-
ment.
5.7. Memory– cancellation of all measurements
Attention!
Before you delete all readings stored in the memory, make sure you
will not need refer to the readings at a later date. Keeping a written
record is prudent and may provide additional information for your
doctor's visit.
22
(MR2-MR30: Values of the
measurement before MR1)