Table of Contents
Advertisement
Appendix A – Technical Data
This chapter describes the technical information for the NMBP-01 module.
The information given here is preliminary, subject to change.
Protocols
Compatible Devices: Any Modicon approved Modbus Plus device.
Communication Type: Modbus Plus
Transmission Speed: 1 MBit/s
Modbus Plus Cable: Belden 9841
Topology: Bus
Fibre Link: 4 MBit/s
Fibre Link Protocol: Distributed Drives Communication System (DDCS)
Power Supply
24 V d.c. regulated
Dimensions
171 mm (6 3/4" ) height
35 mm (1 3/8" ) width
140 mm (5 1/2" ) depth
Mounting
Mounting onto a EN 50022 rail
Enclosure: Phoenix Contact UEG-EU.
Storage
Storage Temperature: 0
° C – 50 ° C
Relative Humidity: 5 % – 95 %, non-condensing
Operation
Ambient Temperature: 0
° C – 50 ° C
Relative Humidity: 5 % – 95 %, non-condensing
Noise Immunity /
The fast transient burst immunity according to standard IEC 801-4: 4 kV 5/
Emissions
50 ns.
Noise emissions according to standard EN 55022 B.
Installation and Start-up Guide for NMBP-01
A-1
Advertisement
Table of Contents
