ABB NMBP-01 Installation And Startup Manual page 27

51.11 GD In2 Stn
51.12 GD In2 Wrd
51.13 GD In3 Stn
51.14 GD In3 Wrd
Installation and Start-up Guide for NMBP-01
This parameter and Parameter 51.12 GD In2 Wrd defines what data is
received for data set 2. This parameter defines the source station for Global
Data which is placed to Reference 1. The choices are the same as Parameter
51.9 (GD In1 Stn).
This parameter and Parameter 51.11 GD In2 Stn defines what data is received
for data set 2. This parameter defines the word number on Global Data which
is placed to Reference 1. The choices are the same as Parameter 51.10
(GD In1 Wrd).
This parameter and Parameter 51.14 GD In3 Wrd defines what data is
received for data set 3. This parameter defines the source station for Global
Data which is placed to Reference 2. The choices are the same as Parameter
51.9 (GD In1 Stn).
This parameter and Parameter 51.13 GD In3 Stn defines what data is received
for data set 3. This parameter defines the word number on Global Data which
is placed to Reference 2. The choices are the same as Parameter 51.10
(GD In1 Wrd).
Note: The changes to the parameters in Group 51 do not take effect immedi-
ately. To change the module settings, either the reset button on the front of the
module must be pressed, or the power must be disconnected from the Modbus
Plus communication module.
Chapter 5 – Programming
5-5