Table of Contents
Advertisement
How to Use this Guide
Installation and Start-up Guide for NMBP-01
This chapter introduces the contents and divisions of this Guide.
The purpose of this Guide is to provide the information necessary to install,
commission, use, and to fault diagnose the Modbus Plus communication
adapter.
Safety Instructions gives the general safety instructions which apply to
ACS 600 and all of its option modules. This chapter also describes the for-
mats and meanings for various warnings used within this guide.
Chapter 1 – Introduction, the chapter you are reading now, contains a short
description of this manual and a list of related publications.
Chapter 2 – Overview contains a short description of the Modbus Plus net-
work and of the Modbus Plus adapter module. Delivery check list for field
installation, and liability of manufacturer.
Chapter 3 – Mechanical Installation contains instructions for module plac-
ing and mounting.
Chapter 4 – Electrical Installation contains instructions for wiring the mod-
ule to power supply, Modbus Plus network, and to the ACS 600 drive.
Chapter 5 – Programming explains how to program the ACS 600 drive for
the Modbus Plus communication, and what additional parameters are avail-
able with the module.
Chapter 6 – Communication describes what drive features and parameters
can be accessed through the Modbus Plus communication module. There is
also information on drive control and how to read the drive actual values and
status information through the Modbus Plus connection.
This chapter also discusses the performance of the Modbus Plus connection.
Chapter 7 – Fault Tracing describes how to fault diagnose the Modbus Plus
connection during installation, commissioning, and normal operation.
Chapter 1 – Introduction
1-1
Advertisement
Table of Contents
