Table of Contents
Advertisement
Getting the projector started
4.3 Power down the projector
Power down using the keypad or remote
1.
Depress and hold the power button on the keypad or remote for four (4) seconds.
The Projector is now in cooling down phase.
2.
Wait 2 minutes before disconnecting the power cord. (If disconnecting is required).
WARNING:
There is a risk of reducing the expected lifetime of the projectors DMD device if the power cord is
removed too early, due to the device's shutdown sequence.
62
R5911705 /02
Bragi
Advertisement
Table of Contents
