Table of Contents
Advertisement
System settings menu
10.1 Communication
About
Settings / Communication / LAN
Network connection is required to communicate with the projector via LAN or Internet.
Current Ethernet communication information is given, and can be edited in this menu.
Default mode for Ethernet communications are: Automatic ON / IP Version 4 DHCP mode.
Setting
Automatic
ON
OFF
IP version 4
Static mode
DHCP mode
Image 10–2
Manually set up the IP adress
Go to the menu Settings / Communication / LAN
Enable the Auto zone on the display and press enter. The Auto zone will change to "Manual".
Scroll down, and modify the desired fields. When in the desired fields, press "Enter" to enable the virtual
keyboard, enter the desired values, and press "Enter" again to confirm the change.
164
R5911705 /02
Bragi
Description
DHCP enabled
Static
Set address, subnet mask and default gateway according to network
specification.
Assigned IP address, subnet mask and gateway.
Advertisement
Table of Contents
