Table of Contents
Advertisement
Installation menu
8.6 Illumination
Illumination introduction
The illumination function allows to adjust the output power to a desired level.
For the FS (simulation) variants of the projector, the IR LED output power is also adjustable.
How to adjust the illumination
1.
Select the menu Installation / Illumination
Image 8–53
The Illumination menu shows up.
Image 8–54
2.
Select the "Desired power" slider, and adjust the slider to a desired level with the arrow keys on the remote
control.
3.
If desired, select the IR LED desired power slider, and adjust the slider to the desired IR power level with
the arrow keys on the remote control.
150
R5911705 /02
Bragi
Advertisement
Table of Contents
