Table of Contents
Advertisement
Image 6–22
The P7 menu is displayed.
Image 6–23
2.
Scroll horizontally and select one of the following custom options:
•
Custom RGB: 3–point color configuration.
In RGB mode, the C, M and Y coordinates will be calculated automatically based on the R, G and B
coordinates.
•
Custom RGBCMY: 6–point color configuration (both RGB and CMY).
In RGBCMY mode, each color can be given a specific coordinate within the measured color triangle.
•
Custom WHITE: Configure only the White temperature.
3.
Define the coordinates for each available color.
Click on a coordinate value and select the current value. Enter the desired value with the numeric keys.
Note: You can only pick coordinates within the measured color triangle.
4.
For Custom White, click on White point and choose one of the following:
•
Coordinates: Configure the white point via specific coordinates.
The white point is specified using an x, y coordinate in the CIE 1931 Chart.
•
Temperature: Configure the white point via a color temperature slider.
The white point is specified on a Kelvin scale between 3200K and 13000K tracking along the black
body curve.
You can reset all coordinates to the default values (to native) by selecting Reset modes to native.
Press OK button to reset.
Image menu
R5911705 /02
Bragi
95
Advertisement
Table of Contents
