Table of Contents
Advertisement
Installation menu
Image 8–26 Symmetric Bow correction.
4.
To enable a symmetric adjustment, make sure the Symmetric slider is set to On.
Image 8–27
The slider is enabled when set to the right and when it is colored blue.
5.
Select the side of the picture to be bow corrected, confirm by pressing enter, and use the arrow keys to
adjust the angle and linearity (length) of the vectors.
The angle is adjusted by the up and down arrows on the remote control, and the linearity is adjusted by the
left and right arrows.
The correction will occur symmetrically on each side of the center of the highlighted side.
When corrected with the values in the image above, the picture will occur as shown below.
Repeat this step for all sides of the picture that has to be corrected.
Image 8–28 Symmetric bow corection
130
R5911705 /02
Bragi
Advertisement
Table of Contents
