Table of Contents
Advertisement
Limiting the opening angle of
the appliance doors
The door hinges are set to enable the
appliance doors to be opened wide.
However, if the opening angle of the
doors needs to be limited for any
reason, the hinge can be adjusted to
accommodate this.
If, for example, the appliance doors hit
an adjacent wall when they are opened,
you should limit the opening angle of
the appliance doors to approximately
90°.
The locking pins for limiting the door
opening must be fitted before the
appliance is installed.
The refrigerator section door must be
removed in order to insert the pins into
the upper hinge of the freezer section
door.
Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approximately 90°.
Changing the door hinges
Always change the door hinging with
the assistance of another person.
The appliance is supplied with right-
hand hinging. If left-hand hinging is
required, the hinges must be changed:
To change the door hinging, you will
need the following tools:
Installation
95
Advertisement
Table of Contents
