Table of Contents
Advertisement
Turning off Demo mode
The symbol is illuminated in the
display.
Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
Touch the sensors for setting the
temperature ( or ) repeatedly
until the symbol flashes in the
display.
Touch the OK sensor to confirm your
selection.
The 1 symbol flashes in the display
(meaning: Demo mode is active) and
the symbol is illuminated.
Information for dealers
Touch the or sensor so that the
symbol 0 appears in the display
(meaning: Demo mode is inactive).
Touch the OK sensor to confirm your
selection.
The selected setting will be adopted
and the symbol will flash.
Touch the settings sensor to leave the
settings mode.
Otherwise the appliance will exit the
settings mode automatically after
approximately one minute.
Demo mode is turned off and
the symbol disappears.
85
Advertisement
Table of Contents
