Table of Contents
Advertisement
Making ice cubes
For the automatic ice cube maker to
operate, it must be connected to a
water supply (see "Installation – Water
supply").
Risk to health due to
contaminated water.
Consuming polluted water can lead
to illnesses.
The first 3 batches of ice cubes
made after the ice cube maker is
started up must not be consumed,
as the water will have been used for
the initial rinsing of the water supply
line.
This applies to the initial
commissioning as well as when
using the appliance again after it has
been turned off for a long while.
Ice cube maker with integrated
ice cube tray
Only make normal domestic quantities
of ice cubes with the ice cube maker.
After the initial commissioning of the
machine, it can take up to 24 hours for
the first ice cubes to drop out of the
ice cube maker and collect in the
drawer.
After the ice cube maker has been
turned off and on again, it can take up
to 6 hours for this process to be
completed.
56
The ice cube drawer contains an
automatic ice cube maker .
When the ice cube maker is switched
on, the indicator light on it lights up.
Ice cubes can only be made when the
ice cube drawer is completely closed.
An ice cube tray where ice cubes are
produced is integrated into the ice cube
maker .
The ice cube tray automatically empties
into the drawer as soon as the ice
cubes are ready. The ice cube maker
automatically stops making ice cubes
when the ice cube drawer is full. The
drawer will not fill up to the top edge.
Advertisement
Table of Contents
