Table of Contents
Advertisement
Installation
Push the loose securing bracket
against the cabinet wall.
Fix the securing bracket to the
cabinet wall with the screw .
Tip: Pre-drill the hole.
The appliance must not pull back
into the unit, as otherwise the gap of
1 5/8" (42 mm) will not be maintained
all the way round.
Push the protruding bracket toward
the cabinet wall using your thumb
while tightening the screws.
Fix the securing bracket to the
cabinet wall with the screws .
Tip: Pre-drill the holes.
Re-tighten screws and .
106
Snap off any protruding ends from
the securing bracket. They are no
longer required and can be disposed
of.
Place the covers and on the
securing bracket.
Advertisement
Table of Contents
