Table of Contents
Advertisement
Selecting additional settings
You can now select °C by touching
the or sensors.
Touch the OK sensor to confirm the
selection.
The selected setting is saved.
Touch the settings sensor to exit
settings mode.
If you do not do this, the appliance
electronics will exit settings mode
automatically after approximately
1 minute.
The temperature will now be displayed
in Celsius.
36
Setting the temperature display to
Fahrenheit
Touch the settings sensor.
All symbols available for selection will
appear on the display and the
symbol will flash.
Touch the sensors for setting the
temperature ( or ) repeatedly until
°C and °F flash on the display.
Touch the OK sensor to confirm the
selection.
°C will flash on the display.
You can now select °F by touching
the or sensors.
Touch the OK sensor to confirm the
selection.
The selected setting is saved.
Advertisement
Table of Contents
