Table of Contents
Advertisement
Cleaning and care
Setting the cleaning position
This setting can only be selected if the
ice cube maker is on.
Empty the ice cube drawer.
Touch the settings button.
All symbols available for selection will
appear on the display and the
symbol will flash.
Touch the buttons for setting the
temperature ( and ) repeatedly
until the symbol for the ice cube
maker flashes on the display.
Touch the OK button to confirm your
selection.
By touching the and buttons,
you can now select the setting you
want:
0: The ice cube maker is switched off
1: The ice cube maker is switched on
2: Set the water volume
3: Select the ice cube tray cleaning
position
4: Rinse the ice cube maker
Touch the OK button to confirm your
selection.
The selected setting is saved and you
will hear the ice cube tray moving into a
slanted position.
Wait until the ice cube tray has
stopped moving before continuing.
The ice cube maker will then switch off.
The symbol for the ice cube maker
will disappear from the display.
64
Remove the ice cube drawer.
The ice cube tray cannot be removed
and must be cleaned in place.
Clean the ice cube tray and the ice
cube drawer with lukewarm water
and liquid dish soap. Wipe thoroughly
with clean water and dry with a cloth.
As soon as the ice cube maker is
switched on, the ice cube tray rotates
back to its original position.
Advertisement
Table of Contents
