Table of Contents
Advertisement
Remove the cover .
Loosely fit the connecting bracket
using the screws .
Tip: Do not tighten the screws so that
you can adjust the position of the
connecting bracket.
Push the contact component onto
the securing bracket .
Loosely fit the securing bracket
using the screws .
Tip: Do not tighten the screws so that
you can adjust the position of the
connecting bracket.
Carefully remove the protective film
from the sealing strip .
Stick the sealing strip onto the
side of the appliance on which the
door will open, flush with the front.
1. Align the sealing strip with the
bottom edge of the top fixing
bracket.
2. Stick it down along its entire length.
Installation
103
Advertisement
Table of Contents
