Table of Contents
Advertisement
Limiting the opening angle of
the appliance doors
The door hinges are set to enable the
appliance doors to be opened wide.
If the opening angle of the doors needs
to be limited to approx. 90°, the hinge
can be adjusted to accommodate this.
The locking pins for limiting the door
opening must be installed before the
appliance is installed.
The refrigerator-section door must be
taken off in order to insert the pins into
the upper hinge of the freezer-section
door (see the installation instructions
provided).
Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
This will limit the opening angles of the
appliance doors to approx. 90°.
Installation
27
Advertisement
Table of Contents
