Adjusting The Door Hinge; Limiting The Opening Angle Of The Appliance Doors - Miele KFN 37232 iD Operating And Installation Instructions

Adjusting the door hinge

Limiting the opening angle of the ap-
pliance doors
The door hinges are set to enable the
appliance doors to be opened wide.
However, if the opening angle of the
doors needs to be limited for any rea-
son, the hinge can be adjusted to ac-
commodate this.
If, for example, the appliance doors hit
an adjacent wall when they are opened,
you should limit the opening angle of
the appliance doors to approximately
90°.
The locking pins for limiting the door
opening must be fitted before the ap-
pliance is installed.
The refrigerator section door must be
removed in order to insert the pins into
the upper hinge of the freezer section
door.
 Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approximately 90°.
Adjusting the door hinge
Always change the door hinging with
the assistance of another person.
The appliance is supplied with right-
hand hinging. If left-hand hinging is re-
quired, the hinges must be changed:
To change the door hinging, you will
need the following tools:
Installation
61